Herunterladen Inhalt Inhalt Diese Seite drucken

Warnings And Contraindications - AquaTools FILT'RAY 2G Bedienungsanleitung

Sterile keimfilter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
Installation:
1. Turn off the water supply.
2. If first installation: remove the original shower head or fit the adaptor fitting if necessary, for the faucet filter, wall mounted
or in-line filter (see removal below).
3. Remove the used FILT'RAY
4. Carefully open the individual unit packaging (bag), making sure that the filter remains inside the bag. Do not touch
the colored end of the tap or the shower head with your fingers.
5 . While keeping the filter in the bag, screw the shower head filter onto the end of the hose or clip on the faucet or wall-
mounted filter. Clip the inlet of the inline filter to the adaptor in the direction of the arrow indicating water flow on the label.
6. The bag can then be removed.
7. Turn the water on for a few seconds to check that the adaptor(s) and the filter are perfectly watertight. In the case of leaks,
repeat the installation procedure, using a new filter, if needed.
Removal:
1. Turn off the water supply.
2. Remove the used shower head filter by unscrewing it from the end of the hose or unclipping the faucet, wall-mounted
and inline filters from the adaptor.
3. Dispose of the used filter according to your institution's established procedures.
A non-leaching bacteriostatic agent is embedded into the housing material of the FILT'RAY
to minimize the risk of retrograde contamination of the devices (see 8 ).
However, use in a non-controlled environment can be a source of retro-contamination.
Any filter that is believed to be contaminated must be replaced, especially if the contaminant is visible.
To do so, filters must not be disconnected or soaked in a cleansing / disinfectant solution.
For Australia, the product should be installed according to the current version of the Plumbing Code of Australia
and AS/NZS 3500.1:2018.
Waste management:
Used FILT'RAY
Disposable Water Filters do not present any special infectious risk. They are classified as normal household
2G
waste. Nevertheless, we recommend that all non-recyclable plastic products be disposed of responsibly via ecological collection
and treatment facilities. The installation guide and the white carton can be recycled (paper/card) (see 9 -1).
Maintenance:
To facilitate the tracking of maintenance procedures, a removable adhesive label (located on the filtration device) can be used
to record important information for your safety records (date of installation, date of removal, filter unique identification number,
etc.). This information is also in shape of UDI (Unique Device Identification) which is a datamatrix with information such as (01)
GTIN: Global Trade Item Number, (10) Lot number, (17) expiration date, (21) Unit Number, (240) aqua-tools Part Number.
Manufacturing date, Expiration date and Lot number are also clearly identified on device labels and packaging.
The device label provides an additional space for the user to note clearly the date of first use and the date of disposal.
Use-life is identified by a numerical symbol featuring the number of months (1, 2, 3, 4) of the use-life specification.
6

WARNINGS AND CONTRAINDICATIONS

• Disposable Water Filters must not under any circumstances be used to produce water for pharmaceutical purposes (i.e.,
water that will be used in solutions intended to be administered orally, injected, or perfused).
• Disposable Water Filters are not intended to provide water that can be used as a substitute for USP grade sterile water.
• Disposable Water Filters are single-use (disposable). They cannot be sterilized or re-installed on another point of use.
• Disposable Water Filters have a limited time use and should not be used once expiration date (indicated on the label)
is past due.
• Disposable Water Filters must not come into direct contact with germ sources (dirty skin or hands, feces...).
• Disposable Water Filters must not be struck or dropped (fall). Filter performance is not guaranteed if the filter casing
is physically damaged. Do not attempt to open the device.
• Disposable showerhead filters should always be placed on the wall bracket after use. They must not be unscrewed at any
point during the period of use. The same applies for the faucet, the wall-mounted shower and the inline filters which must not
be unclipped at any time during the period of use except for when the water supply network is disinfected (at which time a new
filter must be installed).
Filter.
2G
disposable water filters in order
2G

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis