SmartGyro e-Xplorer Bedienungsanleitung Seite 40

It is important that at that time, immediately disconnect the adapter from
the network to stop charging. The battery life will be affected by the
battery charge time, never exceed and will extend the life of your battery.
Please note that the approximate charging time is between 5-7 hours.
Do not leave the product charging once the adapter light has changed to
green or overcharge the battery for more than 5 hours.
IMPORTANT:
a) The charge will be approximately 5-7 hours.
c) Do not overcharge the unit, as this will shorten the life of your battery
and its charger.
Tips to keep in mind when loading
- Load preferably in locations away from flammable products.
- Monitor and control the charging period (which does not exceed the
recommended).
- Use only the original charger.
- Do not leave the skate loading at night.
- If the skate has been exposed to high temperatures, wait and check
that it is not hot before loading it again.
- For the charging procedure it is important that the skate is turned off
and that there is no accessory connected, since if it is not possible for
any of the sensors to be activated and the battery will overheat.
- When the charger LED turns from red to green it is when the smart Gyro
is charged.
- Cannot be charged with ignition or working.
English
e-Xplorer - User Manual
smartgyro.es smartgyro.es
38 12