Commissioning; Servicing; Fuse; Type Signs - flamco Logotherm LogoTronic HIU Bedienungsanleitung

4. Commissioning

The controller is tested during production. All settings are preset to ensure safe and efficient operation.
If you wish to change particular settings, you can do so via the app. The mobile device on which
the app is installed is connected to the controller via Bluetooth®. The operation and settings for
the LogoTronic HIU controller are explained in the app's "Help" function.

5. Servicing

The equipment must be disconnected from mains power before any servicing is carried out!

5.1 Fuse

A safety fuse is installed. The fuse installed is a 2A delayed fuse. The fuse type is: 5 x 20 mm glass fuse.
Fuses may be changed only by specialist personnel once the equipment has been disconnected
from mains power.

6. Type signs

The following information must be printed on the type signs of the relevant manufacturers:
HSF
HSF B.V.
Marketing 23
6921RE Duiven
The Netherlands
Model: HIU Controller V2
Supply: 220 – 240V ~ 50Hz
IP21
"CE Symbol" "Bin Symbol"
Meibes
Meibes System-Technik GmbH
Ringstrasse 18
D-04827 Gerichshain
Deutschland
Model: HIU Controller V2
Supply: 220 – 240V ~ 50Hz
IP21
"CE Symbol" "Bin Symbol"
We reserve the right to change designs and technical specifications of our products.
Flamco
Flamco Group
P.O. Box 502
3750GM, Bunschoten
The Netherlands
Model: HIU Controller V2
Supply: 220 – 240V ~ 50Hz
IP21
"CE Symbol" "Bin Symbol"
9