Led Displays 1-5 - flamco Logotherm LogoTronic HIU Bedienungsanleitung

7.1.2 LED displays 1-5

The LEDs display the status.
Each LED can be either "OFF", "ON", "Flashing slowly" (FLS) or "Flashing fast" (FLF):
- Flashing slowly (FLS) means that the LED alternates between ON for 1 s and OFF for 1 s
(flashing frequency of 0.5 Hz).
- Flashing fast (FLF) means that the LED alternates between ON for 0.25 s and OFF for 0.25 s
(flashing frequency of 2 Hz).
LEDs 1 to 4 show the corresponding status of the controller in normal operating mode. This means that
LED 1 lights up when the room thermostat connected to CON25 has closed its zero-potential contact.
LEDs
Possible display
Function
Switched on
(Run mode)
Switched on
(Test mode)
Switched on
(battery)
Heat exchanger 1
CWM
ALM
Domestic water
circulation
Domestic water
heating
PPU deactivated
PPU paid
PPU unpaid
Cooling
BT connected
USB transfer
started
12
LogoTronic HIU Controller für LogoMatic G2
1 2
Green Green
On/Off/ On/Off/
Flashing Flashing
(FLS/FLF) (FLS/FLF)
Heating DW heating +
Circulation
ON
ON
ON
FLS
FLF
3 4
Green Green
On/Off/ On/Off/
Flashing Flashing
(FLS/FLF) (FLS/FLF)
PPU* Cooling
OFF
ON
FLS
ON
5
corrs. RGB
colour/Off
Status
Green
Magenta
Green FLF
Blue for 10s
Yellow FLS 3s