Sauter OFL3.0 Betriebsanleitung Seite 41

7. Installing the Router Motor on the OFL3.0
1) Turn the height adjuster
unit (9) Has the maximum distance from the insertion plate. This way you get
easiest access to mount the motor.
2) Place the router lift with the operating side down on a firm surface so that the
mounting unit (9) is facing upwards. The mounting unit
removed by itself.
3) Then insert the router motor into the mounting unit
points in the direction of the insert plate
inserted by at least 20 mm and that there is a tight fit. Now tighten the mounting unit
to the recommended torque of 13 Nm. Check the correct fit and tightness regularly.
4) Finally, check the full function and usability of the angle adjustment and pivot in
order to detect possible problems before using.
(1) on the lift anti-clockwise until the mounting
(10), that the collar of the motor is
14
(9) itself should not be
(9). Ensure that the collet
Fig. 3 Mounting the Router Motor