Fuel Safety - Husqvarna 525PT5S Bedienungsanweisung

6. Release the throttle control and make sure that the
cutting attachment stops. If the cutting attachment
rotates with the throttle in the idle position, do a
check of the carburetor adjustments. Refer to
Maintenance on page 15 .
To do a check of the stop switch
1. Start the engine.
2. Move the stop switch to the stop position and make
sure that the engine stops.
To do a check of the vibration damping system
The vibration damping system decreases vibration in the
handles to a minimum which makes the operation
easier. The vibration damping system of the product
decreases the transfer of vibration between the engine
unit and the shaft unit of the product.
1. Stop the engine.
2. Do a visual check for deformation and damage for
example, cracks.
3. Make sure you attach the elements of the vibration
damping system correctly.
8
To do a check of the muffler
The muffler keeps noise levels to a minimum and directs
exhaust fumes away from the operator. In areas with a
hot, dry weather there is a high risk of fire. Obey local
regulations and maintenance instructions
• Do a visual check for damage and deformation.
• Make sure that the muffler is correctly attached to
the product.
• Do a visual check on the spark arrestor mesh.
To do maintenance on the muffler on page
Refer to
17 .

Fuel safety

WARNING:
instructions that follow before you use the
product.
• Do not mix the fuel indoor or near a heat source.
• Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel/oil and let
Read the warning
712 - 007 - 28.04.2021