Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
3.2 Technical data
Table 3.1 Technical data
Material
Dimensions
Inlet/outlet diameters
Maximum vacuum
Volume flow
Weight (without content)
Container volume
4 Installation
The container must stand on a solid and flat surface
and where loading and unloading can be carried out
without risk. Inlet and outlet diameters are Ø150 mm.
5 Maintenance
Empty the container frequently. Overfilling can make
the container too heavy for the transporting vehicle. A
too heavy container can represent a safety risk when
loading and unloading.
10
GA800
The container consists of a stable, welded steel structure.
See Figure 5.
Ø150 mm
45 kPa
Approx. 1600 m³ / h
Approx. 340 kg
Approx. 800 litres
6 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
Nederman for advice on technical service or
if you require help with spare parts. See also
www.nederman.com.
6.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
www.nederman.com/en/service/spare-part-
search).
• Quantity of the parts required.
7 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
Werbung
Inhaltsverzeichnis
