The Machine Stops Because The Motor Has Overheated; The Machine Stops Because Of A Jam; The Machine Is Noisy - Santos 408.120 Serie Bedienungs- Und Wartungsanleitung

 Check: the presence of the feed channel (3) and the locking of the cover (2) in the
lowered position Fig.13

THE MACHINE STOPS BECAUSE THE MOTOR HAS OVERHEATED:

(the casings around the motor units are hot)
- Remove the plug from the power supply socket and follow the instructions in the section
on "motor overheat safety

THE MACHINE STOPS BECAUSE OF A JAM:

See the section on "jamming"

THE MACHINE IS NOISY:

- Check the parts are positioned correctly
- Check no part has been damaged by a fall or the suchlike:
if so, replace this part.
408120 en ma 2017.09
feature".
11/18