Sieve; How To Stop The Machine; Detection Of Hard Food; Jamming - Santos 408.120 Serie Bedienungs- Und Wartungsanleitung

Sieve:

The appliance comes with 2 sieves (13/14): fig.8
- One sieve with small holes to obtain juice (13).
- One sieve with big holes to obtain coulis (14).

How to stop the machine:

The appliance is stopped:
1. by pushing the "On/Off" push button (9),
2. or by unplugging the mains cord plug (22)

DETECTION OF HARD FOOD:

The machine can detect when hard food is inserted inside.
In this case, it automatically performs up to 3 successive reciprocating movements to try
and unblock the screws.
If after this operation, there is still local friction, the machine will stop.
It is then necessary to take down the screws and clean them.

JAMMING:

Food may get jammed in the screw and prevent more from going through.
You are advised to perform a backward operation for a few seconds by pressing the
backward operation button (10) for a few seconds.
Repeat this operation several times as required.
If the jam persists, take down the screws and clean them.

CLEANING

Handle the sieve (13/14) and the screws (11/12) carefully so as not to
!
put them out of shape thus preventing the machine from working
properly.
To clean the sieve
machine, for proper cleaning of the filter sieve holes. Do not use abrasive sponges for
cleaning the machine.
Take down the seals (16), (18), (20) and (21) to clean them with the brushes (23) and
(24) and put them back as shown in the photos Fig.17, Fig.9, Fig.22, and Fig.20.
Cleaning will be easier if you do not wait for the food remains to dry in the moving parts
of the machine.
408120 en ma 2017.09
(13/14), it is recommended to use the brush (23) supplied with the
8/18