FLORABEST HG01767A Montage-Und Sicherheitshinweise Seite 13

Note: Keep 4 pieces of approx. 50 x 50 x 5 cm
paving slabs with minimum total weight 90 kg close
at hand for the paving stand.
Insert the top pole section 9 into the bottom
pole section 3 (Figure E, step
union nut 13 (Figure E, step
˜ Opening the umbrella top
Release the handle 12 by the locking knob 11 in
a counter-clockwise direction (Figure F, step
Push the handle 12 upwards until it reaches the
stopper (top pole section) 10 (Figure F, step
Lock the handle by the locking knob 11 in a
clockwise direction (Figure F, step
Push the crankcase 15 upwards until the arm
7 reaches the stopper (arm) 18 (Figure G,
step ). Lock the support rod 16 by inserting the
1
plastic sleeve 17 downwards to the holder 19
(Figure G, step ).
2
Open the umbrella top 8 completely by turning
the crank 14 in a clockwise direction (Figure H,
step ).
1
Note: The umbrella top 8 might need to be
opened manually at the beginning. The fabric might
be stuck together.
To prevent issues during windy conditions, tie the
strap with adjustable buckle 20 onto to top pole
section 9 (Figure H, step
Note: Alternatively, insert the strap with adjustable
buckle 20 into the loops 22 (Figure H, step
˜ Turning the umbrella roof
Release the handle 12 by the locking knob 11 in
a counter-clockwise direction (Figure I, step
). Tighten the
1
).
2
).
1
).
2
).
3
).
2a
).
2b
).
1
Swivel the arm 7 or the crank case 15 to the
desired position (Figure I, step
Lock the handle 12 by the locking knob 11 in a
clockwise direction (Figure I, step
˜ Inclining the umbrella top
Note: Do not incline the umbrella top during strong
wind conditions. The product might turn over. Risk of
injury and/or product damage.
Release the handle 12 by the locking knob 11 in
a counter-clockwise direction (Figure J, step
Move the handle 12 upwards or downwards to
the desired inclination angle (Figure J, step
Lock the handle 12 by the locking knob 11 in a
clockwise direction (Figure J, step
˜ Closing the umbrella top, moving
the hanging umbrella
Release the strap with adjustable buckle 20
from the top pole section 9 (Figure K, step
Close the umbrella top 8 completely by turning
the crank 14 in a counter-clockwise direction
(Figure K, step ).
2
Pull the plastic sleeve 17 out from the holder
19 (Figure L, step
completely downwards (Figure L, step
Release the handle 12 by the locking knob 11 in
a counter-clockwise direction (Figure M, step
Pull the handle 12 completely downwards to
the union nut 13 (Figure M, step
handle by the locking knob 11 in a clockwise
direction (Figure M, step
Secure the umbrella top by the strap 21
(Figure N).
).
2
).
3
).
3
). Pull the crankcase 15
1
).
2
). Lock the
2
).
3
GB/IE
).
1
).
2
).
1
).
1
11