Trouble-Shooting; Technical Specifications; Symbols Used - Silvercrest SWBP 1000 A2 Bedienungsanleitung

9. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Has the device been con-
nected to the power supply?
• Has the overheating protec-
tion switched off the device?
Set the on/off switch 5 to 0
(off), pull the mains plug 1
No
out of the wall socket and al-
function
low the device to cool down
adequately. Ensure that no
hair or foreign bodies are
blocking the air inlet before
switching the device back
on.
Action
10. Technical
specifications
Model: SWBP 1000 A2
Mains voltage: 220 - 240 V ~ 50 - 60 Hz
Protection class: II
Power rating: 1000 W

Symbols used

Double insulation
Geprüfte Sicherheit (certified
safety). Devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG).
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials: cardboard
(except corrugated cardboard)
It is a recyclable product which is
subject to an extended producer
responsibility and for which the
rules of waste separation apply.
Subject to technical modifications.
19
GB