Converting To Side Discharge - Toro Titan X4850 Bedienungsanleitung

Figure 11
Converting to Side
Discharge
The mower deck and mower blades shipped with the
machine were designed for optimum mulching and
side-discharge performance.
Install the fasteners into the same holes in the deck
from where they were originally removed. This
ensures that no holes are left open when operating
g195746
the mower deck.
WARNING
Open holes in the machine expose you and
others to thrown debris that can cause severe
injury.
• Never operate the machine without
hardware mounted in all holes in the
machine housing.
• Install the hardware in the mounting holes
when you remove the mulching baffle.
Machines with 122 cm (48-inch)
Mower Decks
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower deck; refer to
Mower Deck (page
4. Remove the 2 locknuts (5/16 inch) secured to
the welded posts of the left baffle on the top of
the mower deck at the center and left of center
positions
g195745
1. Locknut (5/16 inch)
2. Carriage bolt (5/16 x 3/4
inch)
17
49).
(Figure 12).
Figure 12
3. Left baffle
4. Install the fasteners here.
Removing the
g011149