Inhaltsverzeichnis
Werbung
72
All manuals and user guides at all-guides.com
Trouble shooting
7.0 Troubleshooting
If a problem with the tire changer should arise, proceed
in the following order to solve the problem:
1. Rethink the last steps taken.
Did you work according to the manual?
Did the unit work as described and expected?
2. Check the unit according to the list in this chapter.
3. Call your local sales agent for technical assistance.
The format of this section is:
Problem
1. Possible cause #1
• Possible solution(s)
2. Possible cause #2
• Possible solution(s)
Operating the turntable rotation pedal does not
cause any movement.
1. No electric power.
• Check that the electric plug is correctly inserted in
the mains socket and that the electric power supply
is on.
• Check that he switch is at ON.
2. Inverter, control device or motor short circuited.
• Check that the electrical requirements of the machine
are compatible with the power supply.
• Call the authorized service center for assistance.
The turntable rotation pedal does not return to
neutral position.
1. Switch spring is broken.
• Bring the switcher pedal to central position.
• Disconnect the machine from the electrical power
supply and the compressed air feed.
• Call the authorized service center for assistance.
Pneumatic controls hard.
1. No oil at valve rods.
• Check oil level and that lubricator is working properly.
Bead breaker cylinder lacks power during bead
breaking.
1. Low air pressure.
• Check air pressure of feed.
2. Cylinder seals worn.
3. Faulty valve
• Check oil level and make sure lubricator is working
properly as described in Maintenance chapter
• Call the authorized service center for assistance.
Operator's Manual
monty universal 2
Werbung
Inhaltsverzeichnis
