Monty UNIVERSAL 2 Betriebsanleitung Seite 38

1
1
38
All manuals and user guides at all-guides.com
2
4.1-8
2
4.1-9
4.1-2
Layout
The manual control (8, Fig.4.1-7) operates opening/
closing of the bead breaker arm, from the working
position to the standby position and vice versa.
Control up; the arm opens outwards.
Control down; the arm closes on the wheel.
3
Automatic Head
The automatic head consists of a tire demounting
section (1, Fig.4.1-8) and a mounting section (2,
Fig.4.1-8), controlled by the pneumatic control.
The control (3, Fig.4.1-8), moves the claw (2, Fig.4.1-
8) to extract and remove the tyre from the rim, with the
following movements:
- Lever down; the head lever moves up
- Lever up; the head lever moves down.
Bead pusher
The bead pusher tool (1, Fig.4.1-9) fitted on the
articulated arm has a pneumatic control (2, Fig.4.1-9)
for vertical movement.
Lever up; the bead pusher moves up.
Lever down; the bead pusher moves down
WARNING: THE OPERATIONS COULD BE
DANGEROUS. FOLLOW THE SAFETY INDICATIONS
SET OUT IN THE PLATES
Figure 4.1-2
WARNING: DANGER OF HANDS BEING CRUSHED
Operator's Manual monty universal 2