Herunterladen Inhalt Inhalt Diese Seite drucken

Monty UNIVERSAL 2 Betriebsanleitung Seite 64

Elektrohydraulische reifenmontiermaschine
Inhaltsverzeichnis

Werbung

64
All manuals and user guides at all-guides.com
5.4-0
5.4.-1
5.4.-2
4.1-5
Operations
Beading Tires with Inner Tubes:
• Ensure that both the beads and the inside of the rim
are thoroughly lubricated.
• Screw the valve insert.
• Connect the compressed air hose to the valve
(Figure 5.4-0 / 5.4-2).
• Place the inner tube inside the tire. Using talcum
powder may facilitate this operation.
• Operate the compressed air to ensure the beads
are seated.
STOP THE COMPRESSED AIR AS SOON AS THE
BEADS GRIP THE RIM WELL.
• Place the wheel in a type approved cage to finish
inflating and completely settle the beads in their
seats on the rim.
Beading Tubeless: tires
Perform the beading with the wheel blocked on the tire
changer.
Beading tubeless tires is sometimes difficult because
the beads may be very close together (e.g. owing to
incorrect stacking) and so fail to seal against the rim
properly.In this event it may be helpful to place the wheel
on the floor in a vertical position and 'bounce' it while
introducing air with the pedal control or with the nozzle
(Figura 5.4-0).
Beading with the GT device:
The machine can be provided with a GT device,
necessary for bead seating of tubeless tires.
Connect the compressed air hose to the valve (Figure
5.4-2).
Position the GT device beading nozzle between tire
and rim, pointing the air jet inside the tire (Figure
5.4-1).
Quickly press the beading pedal down all the way.
A high pressure air jet is expelled from the injector
nozzle and the beads adhere to the edge of the rim,
at the same time the inflation of the tire continues
via the valve.
STOP THE COMPRESSED AIR AS SOON AS THE
BEADS GRIP THE RIM WELL.
• Place the wheel in a type approved cage to finish
inflating and completely settle the beads in their seats
on the rim.
Figure 4.1-5
WARNING: WHEN OPERATING THE BEADING
DEVICE IT IS COMPULSORY TO WEAR EAR
DEFENDERS TO PROTECTAGAINST NOISE AND
SAFETY
GOGGLES
CONTAMINATION BY DUST AND OTHER IMPURITIES
BLOWN BY THE AIR JET.
Operator's Manual
TO
PREVENT
ANY
monty universal 2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vas 6585

Inhaltsverzeichnis