Xpressnet - Addresses Of The Ltm101 Receiver; Starting Up The Lh101-R - Lenz Digital plus LH101-R Bedienungsanleitung

2.1.1

XpressNet - Addresses of the LTM101 Receiver

Since up to four LH101-R wireless handheld controllers can be
operated with one LTM101 receiver, each LTM101 occupies four
XpressNet addresses. In radio operation, the XpressNet address is
assigned to each connected LH101-R handheld controller via the
LTM101. Two address ranges can be selected on the LTM101, the
range 24 to 27 and the range 28 to 31.
The LTM101 receiver is factory set to the address range 28 to 31.
If you are already operating other XpressNet devices in
this address range, you must change the XpressNet
addresses of these devices.
Alternatively, set the LTM101 to the second address
range. You will find instructions on how to do this in the
section "Setting the XpressNet address on the LTM101
receiver"
2.2

Starting up the LH101-R

You will find the switch for the
LH101-R on the back of the unit,
on the right below the battery
cover.
Make sure that the switch is in the
"OFF" position.

S. 37.)
27
E