Installation Process For Remote Monitoring Device (Rmd); Prepare For Installation Using Rmd - LG RESU 16h Rrime Bedienungsanleitung

3.2 Installation process for Remote Monitoring Device
(RMD)
Remote monitoring device (RMD) is a remote device that can install and monitor a battery
pack through App. and web.
3.2.1

Prepare for installation using RMD

3.2.1.1 Installer Registration
3.2.1.1.1 Visit https://resumonitor.lgensol.com
3.2.1.1.2 Create an Installer account.
1
2
3
3
1. Select the "Installer"option.
2. Select "Create Account".
3. Review the General Data Protection
Regulation (Privacy Policy) and check
"I Agree" to indicate consent. Click the
"Next" button to proceed to the next
step.
4
5
6
7
8
9
0
!
@
3.2.1.2 Obtaining IoT Hub String
1
3-1
1. Select "Commissioning" → "Create Commissioning Info" on the left sidebar to
access the commissioning information creation screen.
2. Select a continent (ex. Europe, North America, Oceania).
3. Click the "+" button to the right of "Country", and double-click the appropriate
country from the drop-down list.
4. Click the "+" button to the right of "City", and enter two (2) or more letters in the
search fi eld. Find the appropriate country and double-click it.
5. Select the appropriate RESU Model.
6. Click the "Execute" button to complete product registration. The device
connection string information will sent to the account e-mail address.
4. After entering your ID (e-mail address),
click the "Check Overlap" button to
check for duplicates.
5. Enter your new password and confi rm
the same password in the next fi eld.
Password requirements: 10 to 25
characters long, including letters,
numbers, and special characters (!, #, $,
%, ^, &, +, =).
6. Enter your LG ESS battery web site ID.
(if you don't have account, click the
below.)
7. Enter your country code and phone
number.
8. Click the "Request Authentication Key"
button to receive your authentication key
at the e-mail address you provided. Enter
your authentication key within 5 minutes
to verify your account.
9. Click the "Confi rm" button.
10. Select the "Installer" option.
11. Enter your ID and Password.
12. Click the "Sign In" button.
2
3
4
5
6
4-1
4-1
11