LG RESU 16h Rrime Bedienungsanleitung Seite 23

7.2.3.3 RMD Web Log-in
Enter the password and click 'Register' to go to the home screen. The default password is set to
123456 and can be changed in the Web UI.
7.2.3.4 Confi g setting
1. Server Use: Decide whether to use (connect) to the cloud server.
2. Inverter Type: N/A
3. BMA Number : Select number of Modules: Select 2
4. Communication Type: N/A
5. Country: Select country.
6. Time Zone: Hour: Option to display ±1hour in UTC.
7. Time Zone: Minute: Option to display 15-minute unit.
8. Power Save Timer: N/A
9. Operating Mode: Must select 'With BMS'
10. IotHub Connection String: Enter a unique String used to access the Azure
IoTHub(Cloud Server). String format is as follows:
HostName=emashub.azure-devices.net;DeviceId=
XXXX;SharedAccessKey=OOOO=
* For more information on how to obtain strings, refer to Section 3.2.1.2
Obtaining IoT Hub String
11. After completing all settings, click the Save button.
7.2.3.5 Server Connection(Wi-Fi setting)
(If you have an Ethernet connection and don't want to use Wifi , skip this part)
Enter the Network → Wi-Fi tab.
1. Click the Scan AP button on the top right
2. The number of APs available is displayed
3. Select the AP to access from the SSID
4. If the connection to the AP is successful,
7.2.3.6 Check the Installation Status
Enter the Monitoring → Server Tab. Check the Status values are 'OK'. Whether the Ethernet
connection or Wi-Fi connection 'OK' depends on the server connection method. An example is
the case of Wi-Fi connection.)
of the Web UI.
in a pop-up window.
combo box, enter the password and click
the Connect button(Manual input is
possible).
a pop-up window informs whether the
connection was successful as follows:
23