Technical Data; Noise Information - Bosch GTS 18V-216 Professional Betriebsanleitung

36 | English
(62) Hex socket screws (5 mm) on the rear for adjusting
the parallelism of the saw blade
(63) Screw for saw table spacing indicator
(64) Hex socket screws (5 mm) for adjusting the parallel-
ism of the parallel guide
(65) Screw for parallel guide spacing indicator

Technical Data

Table saw
Article number
Rated voltage
A)
No-load speed
Starting current limitation
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
C)
tion and during storage
Compatible rechargeable batteries
Recommended rechargeable batteries for max-
imum performance
Recommended chargers
Dimensions (including detachable parts of the tool)
Width x depth x height
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Min. tooth thickness/offset
Hole diameter
A) Measured at 20−25 °C with rechargeable battery ProCORE18V 12.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Maximum workpiece dimensions: (see "Maximum workpiece dimensions", page 41)

Noise information

Noise emission values determined according to
EN 62841-3-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power level
94 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
1 609 92A 5HL | (11.09.2020)
(66) Adjusting screws for table insert
(67) Push stick storage compartment
(68) Hex key storage compartment
(69) Ring spanner storage compartment
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GTS 18V-216
3 601 M44 000
3 601 M44 040
V=
-1
min
B)
kg
°C
°C
ProCORE18V...
ProCORE18V... ≥ 5.5 Ah
mm 658 x 332 x 553
mm
mm
mm
mm
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
GTS 18V-216
3 601 M44 0B0
18
4500
●
20.5−21.6 20.5−21.6
0 to +35
–20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V...
ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
658 x 332 x 553
216
< 1.5
> 1.7
30
Bosch Power Tools
18
4500
●
0 to +35
GAL 18...
GAX 18...
GAL 36...
216
1.5–2.1
> 2.3
25.4