XBOX 360 Handbuch Und Garantie Seite 9

If you're using an Xbox 360 Wireless
Networking Adapter that's already
connected to the back USB port, you'll need
to disconnect its USB cable and reconnect it
to a front USB port using the WiFi extension
cable, provided.
electrical Safety
As with many other electrical devices,
failure to take the following
precautions can result in serious injury
or death from electric shock or fire or
damage to the sensor.
If you use AC power, select an
appropriate power source:
• The sensor's power input is 12V DC @
1.1A. Use only the AC adapter on the
USB/power cable that came with your
sensor or that you received from an
authorised repair centre.
• Confirm that your electrical outlet
provides the type of power indicated
on the USB/power cable, in terms of
voltage (V) and frequency (Hz). If you
aren't sure of the type of power
supplied to your home, consult a
qualified electrician.
• Do not use non-standard power
sources, such as generators or
inverters, even if the voltage and
frequency appear acceptable. Use
only AC power provided by a
standard wall outlet.
• Do not overload your wall outlet,
extension cord, power strip, or other
electrical receptacle. Confirm that
they are rated to handle the total
7
To reconnect a wireless networking adapter
to a front USB port, if necessary:
Unplug the wireless networking adapter
1
cable from the USB port on the back of
the console, leaving the adapter itself
attached to the console.
Attach the WiFi extension cable to the
2
wireless networking adapter's USB cable.
Plug the other end of the extension cable
3
into a USB port on the front of your
console.
current (in amps [A]) drawn by the sensor
(indicated on the USB/power cable) and
any other devices that are on the same
circuit.
To avoid damaging the USB/power cable:
• Protect the cable from being pinched or
sharply bent, particularly where it
connects to the power outlet and the
sensor.
• Protect the cable from being walked on.
• Do not jerk, knot, sharply bend, or
otherwise abuse the cable.
• Do not expose the cable to sources of
heat.
• Keep children and pets away from the
cable. Do not allow them to bite or chew
on the cable.
• When disconnecting the cable, pull on
the plug—do not pull on the cable.
If the USB/power cable becomes damaged
in any way, stop using it immediately and
contact Xbox Customer Support for a
replacement.
Unplug your sensor's USB/power cable
during lightning storms or when unused for
long periods of time.