Connecting The Device; Protecting The Device From Defects - Telestar Imperial DABMAN 16 Bedienungsanleitung

2. SAFETY INSTRUCTIONS
Unplug the device from the power socket if you are absent for a longer period and during
thunderstorms.
Make sure that contact with moisture, water or spray is avoided and that no objects filled with
liquids -
e.g. vases - are placed on or near the appliance or power adapter.
If foreign bodies or liquids get into the device or the power adapter, pull the power adapter
out of the socket immediately. Have the device checked by qualified personnel before you use
it again. Otherwise, there is a risk of electric shock.
Make sure that the device and the power adapter are not exposed to dripping or splashing
water and that there are no naked flames (e.g. burning candles) near the device or the power
supply.

2.4. Connecting the device

> Only connect the device to a power supply that
complies with standard regulations.
> If you are operating the device with a power adaptor, please
ensure that the power source (power adaptor provided) is easy to access.
> Do not kink or crush any cable connections.
> Before using the device, check whether the voltage information on the
devicecorresponds to the local mains voltage. The information on the power adapter
must correspond to the local mains supply.
> Only connect the device to the power using the power adaptor provided.
> Place the device on a firm, level surface.
> The device consumes power in standby mode. To fully switch off the device, the power
supply must be cut off.

2.5. Protecting the device from defects

NOTE!
> Unfavourable environmental conditions such as moisture, excess heat or a
lack of ventilation can damage the device.
> Only use the device in dry rooms.
Avoid the direct vicinity of: heat sources, such as radiators, naked
flames such as candles and devices with strong magnetic fields such as speakers.
Do not expose the device to extreme conditions, e.g. direct
sun, high humidity, moisture, extremely high or low
temperatures, naked flames.
> Ensure that there is sufficient distance from other objects so that the
device is not covered and adequate ventilation is always guaranteed.
> Avoid direct sunlight and unusually dusty locations.
> Do not place any heavy objects on the device or the power adapter.
> Do not use the device in potentially explosive environments.
> These include, for example, fuel storage areas, tank facilities,
or areas in which solvents are stored or processed.
> Do not use the device in areas with air that is contaminated with particles
(e.g. flour or sawdust).
40
DE