Safety Instructions; Explanation Of Symbols - Telestar Imperial DABMAN 16 Bedienungsanleitung

2. SAFETY INSTRUCTIONS

2.1. Explanation of symbols

DANGER!
This signal indicates a
hazard with a high level of
risk which, if the instruction
is not observed, will result
in death or serious injury.
NOTE!
This signal
warns the user of possible
material damage and
references
special descriptions for the
operation of the device.
Products labelled with this
symbol
meet the requirements of
the guidelines of the
European
Community.
Devices with this symbol
may
only be used indoors in
a dry
environment.
38
DE
WARNING!
This signal indicates a
hazard with a medium
level of risk which, if the
instruction is not observed,
may result in death or
serious injury.
This symbol indicates
danger.
-
+
This symbol indicates the
polarity of the
plug for devices with hollow
plugs.
Outside minus / inside plus
CAUTION!
This signal indicates a
hazard with a low level of
risk which, if the instruction
is not observed, may
result in minor or moderate
injury.
Protection class II
Electrical devices
that fall under
protection class
II have reinforced
or double insulation
to the amount of
the rated
insulation
voltage between
active and accessible
parts (VDE 0100 part
410, 412.1).
They usually have no
connection to the
protective
conductor.
Even if
they have
conductive
surfaces, they are
protected
from contact with
other live parts by
reinforced or
double insulation.