Operation And Functions; Fm Radio - auna Wallie Bedienungsanleitung

EN
40

OPERATION AND FUNCTIONS

FM RADIO

AUTO Scan (SCAN)
You can use the scan (auto tune) function to automatically scan for new
digital radio stations and remove inactive ones.
1. Press and hold the PLAY/PAUSE/FM SCAN button (5) on main unit or
(2) on remote control for 2 seconds to choose "Scan". The number of
stations found will be displayed during the auto tune. When the auto
tune has finished, it will tune to the last station that you were listening
to. If the last station you were listening to is no longer available, it will
tune into the first station in the alphabetical list.
2. To manually tune to a specific radio station, tap the

BACKWARD buttons (3/1) on main unit or (9/10) on remote control
repeatedly.
Recalling Preset Memory Channels
• In radio mode, recall the pre-set channels by pressing the buttons
PRESET + or PRESET - on main unit (15/16) or on remote control (5/12)
repeatedly. (Note: "P01" will blink in the display if you are programming
preset for the first time.)
NOTE: The clock and FM radio station presets will need to be reset if the
power is interrupted or in the event of a power outage. "12:00" will appear
and start blinking on the LCD display to notify you that the power was
interrupted and the clock will need to be reset. Please follow the steps
above to resave the preset stations.
NOTE: During FM search and listening the LCD shows no frequency display.

FORWARD or