Operation Guide - SPORTSTECH F17 Benutzerhandbuch

OPERATION GUIDE

The terms used in the specification are:
Treadmill parameters: "speed" value
Motion parameters: Distance value, Calorie value, Time value, Heartbeat value.
Movement mode: manual, mode, rogramme
Full manual movement mode: no movement mode for setting the amount of exercise.
Countdown mode Movement mode: A motion mode with a specific amount of motion.
Automatic programme movement mode: treadmill internal set from the different sports programs, the treadmill
has a set 12 kinds of sports programmes.
Movement parameters in various motion modes:
• Minimum display speed of 1 km / h
• Maximum display speed of 10.0 km / h
• The longest movement time in the time mode: 99 minutes
• Minimum movement time in time mode: 8 minutes
• The longest movement distance in distance mode: 99 km
• Shortest distance in the distance mode: 1 km
• Maximum calories in calorie mode: 990 cards
• Minimum calories in calorie mode: 20 cards
• (P1-P12) The minimum time for automatic programme operation: 8 minutes
• (P1-P12) Maximum time for automatic programme operation: 99 minutes
OPERATE THE TREADMILL:
Make sure that the treadmill is correctly connected to a power source. Touch the red button behind the
motor cover from o to 1 and switch on the power. You will hear a signal and the LCD screen will light up.
Fix the SAFETY KEY on the console. If the safety key is not on the console, the console will display
"Err1". AND YOU MUST CLIP IT TO YOUR CLOTHES BEFORE YOU START TO USE THE TREADMILL TO PRO-
TECT YOU. If you fall, the safety key will fall off and the treadmill will slow down and stop.
1.START:
The treadmill is in stop state. To start, stand on the running belt and press the start button. The initial speed is
1.0km/h. Never try to start the device while you are not standing on the running belt. As soon as the running belt
is in motion, use the +/- adjustment buttons to increase or decrease the speed.
30