Maintenance; Environmental Protection - eta Leila Bedienungsanleitung

GB
VERTICAL SYSTEM
It is intensive vertical steaming for steaming of freely hanging textiles (such as hanging
clothes, draperies, hangings). Set the regulation temperature dial A5 to the marked area
for steaming (Fig. 3). As soon as the indication lamp A6 turns OFF, stretch the fabric
slightly with one hand and move the iron vertically bottom-up (Fig. 7B – ). Press the
intensive steaming button A4 so that you reach vertical steam hammer. Do not hold the
intensive steaming button pressed continuously and do not use it more than 5 times
consecutively. Also allow at least one minute interval before applying this burst of steam
function.
!
WARNING
– Use the VERTICAL function only if the regulation temperature dial A5 to the ••• or
maximum position.
Storage
After finishing ironing, pour out the unused water from the container (be careful, it can be
hot), or let the rest of the water evaporate and let the iron cool down. Then turn regulator
A2 to position (steam switched off). Put the iron to the rest position (Fig. 8). For tilting
the handle you have to push lock button A11 (Fig. 9). The travel case B is for storing the
appliance.
IV. MAINTENANCE
Before every maintenance, unplug the iron from power supply by taking the fork of
the power cord out of the socket! Do not use rough and aggressive detergents
(e.g. sharp objects, peelers, pot scourers, caustic agents for cleaning or other
solvents). Wipe the entire iron with a wet cloth in the cooled state and dry up. If brown
film is created on the ironing plate (e.g. when ironing starched laundry), you can remove
the film by a detergent containing fine sand. The iron is equipped with a permanent
decalcification system ANTI CALC that does not require maintenance. But the system
cannot fully prevent creation of calcareous sediments.
V. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts of the appliance The
symbols specified on the product or in the accompanying documentation mean that the
used electrical or electronic products must not be disposed of together with municipal
waste. For proper disposal, hand them over at the special collection places where they
will be accepted free of charge. Suitable disposal of the product can help to maintain
valuable natural resources and to prevent possible negative impacts on the environment
and human health, which could be the possible consequences of improper waste disposal.
Ask for more details at the local authorities or at a collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations. If the
appliance is to be put out of operation for good, after disconnecting it from power supply
we recommend cutting off the power cord and in this way it will not be possible to use the
appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
20 / 39