Decommissioning; Maintenance And Cleaning - Conrad 55 14 52 Bedienungsanleitung

All manuals and user guides at all-guides.com

10. Decommissioning

If the clear water pump is to be disconnected from the hose (e.g. for cleaning, maintenance or storage in winter),
proceed as follows:
• Disconnect the clear water pump from the power supply, pull the mains plug from the mains socket.
• Pull the clear water pump from the water by the attachment rope or carry handle.
The clear water pump must never be pulled out by the mains cable or hose! This may damage the mains
cable; there is danger to life from electric shock!
• Disconnect the hose from the clear water pump.
• Let residual water run out of the clear water pump by holding it diagonally.
• Dry the clear water pump and the mains cable. Coil up the mains cable.
• Store the clear water pump in a frost-protected and dry room over winter.

Also consider emptying the hoses placed outdoors to prevent frost damage; open any water taps that may
be installed.
• Carry or transport the clear water pump only by the carry handle. Never hold it by the hose or even the mains cable.
• After operation or emptying, a small amount of water may be retained in the clear water pump. Therefore, use a
suitable support when storing or transporting it in a vehicle.

11. Maintenance and Cleaning

The clear water pump has no parts that require maintenance by you. Therefore, never open or disassemble it.
Maintenance or repair and opening of the clear water pump in this context must only be performed by a specialist
or specialist workshop.
Before cleaning, switch off the clear water pump and disconnect it from the mains voltage; pull the mains plug from
the mains socket.
To clean the outside of the clear water pump, a dry, soft and clean cloth is sufficient. If required, flush the outside with
clear water.
Any contamination of intake openings may be removed under running water (e.g. garden hose). The pump inside
may be flushed with running water as well by removing the hose and connection piece.
Dry the clear water pump and the mains cable before storing it.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since these may
damage the casing or even impair function.
24