Preamplifi Er Output - Blaupunkt Calais MP48 Bedienungs- Und Einbauanleitung

IR remote control
CD changer mode
Button Function
F
Plays the next track
D
Plays the previous track
E
Plays the next CD
C
Plays the previous CD
MP3 mode
Button Function
F
Plays the next track
D
Plays the previous track
E
Plays the next directory
C
Plays the previous direc-
tory
60
Preamplifi er output
You can connect an amplifi er to the device
to operate a low-bass loudspeaker (sub-
woofer). To do so, the amplifi er must be
connected to the rear side of the device
(chamber C1). The level of the subwoofer
can be adjusted in the Audio menu:
u Press the AUD button :.
u
Press the or
edly until "SUB WOOF" appears.
After approx. 2 seconds, "SUBW" and
the current setting are shown on the dis-
play 6.
u
Press the or
the level for the subwoofer between 0
and 7.
Note:
You do not have to wait for the display
of the current setting to change it by
pressing the or
To exit the menu,
u press the AUD button :.
Preamplifi er output
button 8 repeat-
button 8 to adjust
button 8.