Adjusting The Middle; Adjusting The Left/Right Volume Distribution (Bal); Adjusting The Front/Rear Volume Distribution (Fad) - Blaupunkt Calais MP48 Bedienungs- Und Einbauanleitung

To adjust the bass level,
u
press the or
edly until "GAIN" appears.
After approx. 2 seconds, "GAIN" and the
current setting are shown on the display.
u
Press the or
the bass level between –7 and +7.
To adjust the quality factor for bass,
u
press the or
edly until "Q-FACTOR" appears.
After approx. 2 seconds, "Q" and the cur-
rent setting are shown on the display.
u
Press the or
the quality factor between 1.0 and
2.0.
To exit the menu,
u press the AUD button :.

Adjusting the middle

u Press the AUD button :.
u
Press the or
edly until "MIDDLE" appears.
u
Press and hold down the
ton 8 for longer than 2 seconds.
"FREQ" and the currently set centre fre-
quency appear briefl y on the display.
To select a different centre frequency be-
tween 500 Hz and 2.5 kHz,
u
press the or
To adjust the middle level,
u
press the or
edly until "GAIN" appears.
After approx. 2 seconds, "GAIN" and the
current setting are shown on the display.
u
Press the or
the middle level between –7 and +7.
button 8 repeat-
button 8 to adjust
button 8 repeat-
button 8 to adjust
button 8 repeat-
or but-
button 8.
button 8 repeat-
button 8 to adjust
To adjust the quality factor for the middle,
u
press the or
edly until "Q-FACTOR" appears.
After approx. 2 seconds, "Q" and the cur-
rent setting are shown on the display.
u
Press the or
the quality factor between 0.5 and
1.25.
To exit the menu,
u press the AUD button :.
Adjusting the left/right volume
distribution (BAL)
u Press the AUD button :.
u
Press the or
edly until "BAL" appears on the display
with the current setting.
u
Press the or
the left/right volume distribution be-
tween –10 and +10.
To exit the menu,
u press the AUD button :.
Adjusting the front/rear volume
distribution (FAD)
Note
The rear loudspeakers must be con-
nected via an additional amplifi er.
Press the AUD button :.
u
u
Press the or
edly until "FAD" appears on the display
with the current setting.
u
Press the or
the front/rear volume distribution be-
tween –10 and +10.
To exit the menu,
u press the AUD button :.
Sound
button 8 repeat-
button 8 to adjust
button 8 repeat-
button 8 to adjust
button 8 repeat-
button 8 to adjust
43