Traffi C Information; Radio Mode; Rds; Changing To Radio Mode - Blaupunkt Atlanta 110 Bedienungs- Und Einbauanleitung

Traffi c information

In the tuner region "EUROPE", an FM station can
identify traffi c reports by means of an RDS signal. If
priority for traffi c announcements is switched on,
a traffi c announcement is automatically switched
through, even if the car sound system is currently
not in radio mode.
If priority is switched on, the display shows the
traffi c jam symbol (
during a switched-through traffi c announcement.
To switch the priority on and off , please read the
section "Performing settings in the user menu",
"TRAF" menu item in the chapter "User settings".
Notes:
• The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum vol-
ume for traffi c announcements (see the
ch. "User settings", section "Performing
settings in the user menu", "TA VOLUME"
menu item).
• To cancel a switched-though traffi c an-
nouncement, press the DISP/ESC button
<
.

Radio mode

RDS

Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme in
the tuner region "EUROPE" that allows the follow-
ing additional functions:
• The station name is shown on the display.
• The car sound system recognises traffi c an-
nouncements and news broadcasts and can
automatically switch them through in any op-
erating mode (e.g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
). "TRAFFIC" is displayed
Traffi c information | Radio mode
• Regional (REG): At certain times, some radio
stations divide their programme into regional
programmes providing diff erent content. If the
REG function is activated, the car sound system
changes only to those alternate frequencies on
which the same regional programme is being
broadcast.
To switch the RDS or REG function on or off , please
read the section "Performing settings in the user
menu" in the chapter "User settings" (menu items
"RDS", "REG").

Changing to radio mode

u
Press the SRC button
"TUNER" is displayed:
The current memory bank appears once as
scrolling text on the display.

Selecting the memory bank

The following memory banks are available in the
diff erent tuner regions:
Region Memory banks
EUROPE FM1, FM2, FMT, MW, LW
USA FM1, FM2, FMT, AM, AMT
THAI FM1, FM2, FMT, AM
S AMERICA FM1, FM2, FMT, AM, AMT
u
Press the button
the desired memory bank is displayed.
Note:
Up to 5 stations can be stored in each mem-
ory bank.

Tuning into a station

There are various ways of tuning into a station:
Tuning into stations manually
u
Briefl y press the button
several times to change the frequency in
increments, or long to quickly change the
frequency.
;
repeatedly until
7
/ repeatedly until
7
/ once or
21