Traffi C Information; Switching Traffi C Information Priority On/Off; Setting The Volume Increase For Traffi C Announcements; Cancelling Traffi C Announcements - Blaupunkt Calais MP48 Bedienungs- Und Einbauanleitung

Traffi c information
Switching traffi c information
priority on/off
To switch the priority for traffi c information
on or off in any operating mode,
press the TA button ;.
u
Note:
In the operating modes CD, MP3, CD
changer and AUX, this function is avail-
able only if the FM waveband was tuned
to last.
The priority for traffi c announcements is ac-
tivated if the display 6 shows the TA sym-
bol. As soon as the device receives a traffi c
announcement, it is switched through. The
display 6 shows "TRAFFIC" for the dura-
tion of the announcement.
Note:
You will hear a warning beep,
• if you leave the reception area of a
traffi c information station that the
system is tuned into while listening
to the traffi c information station or
a CD, and the subsequent automatic
seek tuning cannot fi nd a new traffi c
information station.
• if you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
If you hear the warning beep, you can
either switch off traffi c information pri-
ority or tune into a station that broad-
casts traffi c information.
Setting the volume increase for
traffi c announcements
You can adjust how many volume levels
the traffi c announcements are played back
louder than the adjusted volume:
u Press the MENU button 7.
u
Press the or
edly until "TA VOL" appears.
After approx. 2 seconds, "VOL" and the cur-
rent setting are shown on the display 6.
u
Press the or
just the volume increase between 0
and 10.
Note:
You do not have to wait for the display
of the current setting to change it by
pressing the or
To exit the menu,
u press the MENU button 7.
Note:
Using the volume control 1, you can
adjust the volume during a traffi c an-
nouncement for the duration of that
announcement.
Cancelling traffi c
announcements
To cancel an ongoing traffi c announcement
and return to the previously playing audio
source,
u press the TA button ;.
The priority for traffi c announcement re-
mains activated.
Traffi c information
button 8 repeat-
button 8 to ad-
button 8.
49