Changing The Favourite Name; Channel Pool (For Advanced Users) - Philips DSR 1010 Betriebsanleitung

N.B.:
Copying:
N.B.:
N.B.:

4.1.2 Changing the favourite name

Call up the list using the OK key.
Select the input field {NAME} using the keys 0...9 or 98and activate by pressing OK .
You can select letters (upper or lower case) or numbers using the 9 or 8 key.
You can shift the input position right or left using the * or + key.
After inputting the desired name, the input field is deactivated again by pressing the OK key.

4.1.3 Channel pool (for advanced users)

The channel pool contains all channels in alphabetical order. Selection depending on satellite is
done using the M key; free or encrypted channels are chosen by pressing the TV key. All free
(or all encrypted) channels on the selected satellite are contained in the «All Free» section, also
the new free or encrypted channels after performing satellite search mode.
98Select channels in rows.
All selected channels are set immediately by the receiver and indicated in the background. The
screen transparency can be changed using the F key and (within 2 seconds) the + or * key.
M
Selection of satellite using the M key.
TV
Selection of free or encrypted channels using the TV key.
?
After pressing the MUTE key, individual channels can be deleted - e.g. channels that are
no longer on the air.
R
The channel pool activated using the M and TV keys can be managed here, i.e. all
«unused» channels or also all indicated channels can be deleted.
i
Show antenna signal and reception parameters.
"
All manuals and user guides at all-guides.com
The transparency of the superimposed image can be switched between
variable and fixed (fixed in not transparent) using the F key.
In 'VAR' mode the transparency can be increased or decreased using the
+* keys.
This function is very useful when sorting and copying channels, as high
transparency gives the user the chance to quickly decide on the type
and content of a particular channel.
Adjust the desired source channel using the +*keys, then locate the
position in the favourite list where the channel is to be inserted using the
98keys or directly via the number keys 0...9 .
Press the OK key - done!
The unit detects channels, which are already stored in the current
favourite list - if this is the case the equal symbol (=) is displayed in the
grey bar.
If you have accidentally deleted channels or wish to cancel the changes
made, then exit the menu using the E key and then press the E key
again.
Any changes made will not be stored until you press the OK key.
+*Select channels in columns.