Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.5
Messaggi di errore
Nell'improbabile caso che si visualizzi un messaggio di errore, seguire i prompt corrispondenti.
I possibili messaggi di errore sono:
Errore n. 1: The air or gas readings were unstable.
•
Soluzione: Move the unit away from sources of EMF or RFI such as radio transmitters
and arc welders.
Errore n. 2: The air or gas readings were excessively high.
Soluzione: Move the unit away from sources of EMF or RFI such as radio transmitters
•
and arc welders.
Errore n. 3: The air calibration resulted in a low output.
Soluzione: Prevent refrigerant from flowing into the unit through the sample inlet during
•
air calibration.
Soluzione: Allow any refrigerant in the atmosphere to dissipate before performing air
•
calibration.
Soluzione: Verify that the air intake and the exhaust are not obstructed.
•
•
Soluzione: Verify that the white filter is correctly plugged into the rubber grommets.
Errore n. 4: The unit is beyond the operating temperature range.
•
Soluzione: Move the unit to an area where the ambient temperature is within the
specified operating range.
Errore n. 5: The refrigerant sampled has an excessively large amount of air or there was a little or no
sample flow due to a closed valve or plugged sample filter. Questo messaggio indica che occorre
sostituire il filtro in ottone e va considerato più un'indicazione che un vero e proprio errore.
•
Soluzione: Verify the coupler valve is open.
Soluzione: Verify the sample filter is not plugged with debris or oil.
•
•
Soluzione: Replace brass sample filter.
Errore n. 6: The air sensor has expired and must be replaced before the analyzer can be used.
Errore n. 7: The gas pressure is out of range.
•
Soluzione: Verify the SAMPLE EXHAUST port is not obstructed.
Se un messaggio di errore persiste, contattare Neutronics o il centro di assistenza locale.
Neutronics Inc.
456 Creamery Way
Exton, PA 1934, USA
Tel:
+1 610.524.8800
Fax:
+1 610.524.8807
Per contattarci:
Visitateci al sito:
Codice del manuale:
5-06-7000-80-0
info@refrigerantid.com
www.refrigerantid.com
Archivio del manuale:
046977 Rev. A
Pagina 3-22
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
