JANE AUTO SPORT Gebrauchsanweisung Seite 6

FITTING THE 4 UPPER WHEELS
Fit the inner hole of each of the 4 upper wheels onto the supports of the upper base and press inwards until fully
inserted (you will hear the safety CLICK when they are locked into place).
FITTING THE WING MIRROR
Slot the wing mirror into the hole and press downwards until fully inserted (you will hear the safety CLICK when
it is locked into place).
ASSEMBLING THE COVER
Front fastening
Slot the front plastic cover supports into the front
holes on the upper base and press the cover down
until it fits perfectly.
ADJUSTING THE HEIGHT OF THE WALKER
To adjust the walker to the height you want, hold the upper part with one hand and with the other unlock the
safety switch located below the upper tray, turning it 90° and pressing upwards until you reach the desired
height.
Warning - Do not adjust the height of the walker while the child is in it.
"click"
"click"
"click"
Backrest fastening
Insert the plastic supports into the holes on the
upper tray by pushing until it fits perfectly. Check
that all the supports are completely secured.
1º
6
"click"
2º