Setting The Clock; Other Main Functions; Changing The General Settings (Psm); Basic Procedure - JVC KD-SH77R Bedienungsanleitung

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Set the hour.
1 Select "CLOCK HOUR" if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK MIN."
2 Adjust the minute.
1
4
Select the clock system.
1 Select "24H/12H."
2 Select either "12HOUR" or "24HOUR."
1
5
Press SEL (select) to finish the setting.
To check the current clock time while the unit
is turned off, press D (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.

OTHER MAIN FUNCTIONS

2
2
2
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.

Basic Procedure

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Select a PSM item you want to adjust.
(See page 24.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Press SEL (select) to finish the setting.
23