Werbung
Operating Instructions STR 100 microSAT
Note:
This chapter contains excerpts from the operating instructions. For further particulars please refer to the
appropriate user instructions the part number of which is indicated in the relevant spare parts list.
Front of the receiver
A
TUNER 2 1
INT DECODER
1
B
2
Ku BAND
C
2 1
E U R O
STE 1000
TUNER 2 1
INT DECODER
A
Ku BAND
C
1
B
2
2 1
E U R O
A
The control keys of the receiver are to be found
behind the front flap.
1
Slightly press against the right top of the front flap
(see arrow) to open it.
2
Press against the same point to close the front flap.
It locks in.
Power switch (no mains separation).
Not used.
A
Down – selects the channel below the current
channel.
Up – selects the channel above the current
channel.
and . Press at the same time to toggle between
standby and demo mode (see chapter "Demo
Mode").
The receiver for the infrared signals from the
remote control handset is located at the right of the
display.
E
X
T
NRS
E
X
T
NRS
Werbung
