Life & Mobility Primo 3 Gebrauchsanweisung Seite 40

Use of the Arrivo package
Starting
1. Insert the key in the ignition lock (O)*.
2. Turn the key a quarter turn clockwise.
3. Wait until '0 mph' (0 km/h) appears on the
display.
AFSTANDEN
The mobility scooter is now ready to drive.
TOTAAL 19 KM
Speed
TRIP 0 KM
0.3 km
Use the throttle lever to control the speed.
With the HI/LO function you can change directly
from high speed (max. 7,5 mph, 12 km/h) to low
MENU
speed (max. 4 mph, 6 km/h) and vice versa.
0.3 km
Warning
ƒ Adjust your speed before steering into a
MENU
0.3 km
bend. The bend speed limiter will not adjust
your speed until the bend is too tight. The
scooter may overturn.
MENU
Despite the small turning circle of the
ƒ
mobility scooter, it may still be difficult to
TIJD,DATUM
turn into lifts or doorways. Make sure that
you always use the correct low speed setting
10:24 uur
for tight manoeuvring.
25 Jan 11
INSTEL TIJD,DATUM
Attention
10 : 24 uur
ƒ Adjust your speed using the throttle lever.
MENU 25 Jan 11
The speed settings determine how fast you
can go if you squeeze the throttle lever all
the way.
Check that the road behind you is clear
ƒ
MENU
when reversing.
ƒ The mobility scooter reverses more slowly
than when it drives forward.
MENU
ƒ An alarm can be heard when reversing.
ƒ On request, your supplier can change the
throttle lever control (method).
* This is located on the left or right­hand side,
depending on the configuration of your
mobility scooter.
GB32
MENU
10:24
0.3 km 10:24
0
0
MENU
10:24
km/u
Ga laden
MENU
10:24
MENU
MENU
MENU
MENU
STOP
MENU
RESET
0.3 km
O
0.3 km 10:24
Default view
Ignition lock
speedometer
0.3 km 10:24
Ga laden
km/u
Indoors, in shops, etc.
0.3 km 10:24
On the pavement
0.3 km 10:24
Ready for use
In busy streets
INSTEL TIJD,DATUM
10 : 24 uur
On quiet streets
25 Jan 11
R
STOP
RESET
By default the speedometer is set to 4 blocks,
10:24
which is 40% of the total power. The maximum
0
speed is 7,5 mph (12 km/h). Your supplier can
km/u adjust the speed setting.
1. Press the + or - button to adjust the speed
0
setting.
MENU
Choose a suitable speed setting for each
km/u
situation.
ƒ Indoors, in shops, etc., 1 to 2 blocks
MENU
ƒ On the pavement: up to 4 blocks
ƒ In busy streets: up to 7 blocks
ƒ On quiet streets: up to 10 blocks
MENU
MENU
MENU
Driving forward and reversing
1. Slowly squeeze the throttle lever
(R1)*.
MENU
The mobility scooter starts moving
forwards.
2. Squeeze the throttle lever further.
The mobility scooter will start moving
MENU
forward more quickly.
3. Release the throttle lever.
The mobility scooter will stop.
The brake lights are activated.
4. Use throttle lever (a)* to reverse.
* This is located on the left or right­hand side,
depending on the configuration of your
a
mobility scooter.
Use of the Arrivo package
0.3 km 10:24
Ga laden
0.3 km 10:24
0.3 km 10:24
STOP
RESET
GB33