Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Insert/Remove Battery (Not Included)
Make sure the power switch lock (8) is
disengaged
• To insert a battery pack (4), align the tab on the
battery with the slot on the base of the housing.
• Hold the tool and battery pack firmly without touching
the power switch (9).
• Slide the battery all the way in until it locks into place
with a "click". Make sure it is securely fixed in place
before letting go.
• Do not use force when inserting the battery. If it does not slide in easily, the battery is not being inserted correctly.
• Press the battery release button (3) to remove the battery pack.
10. Vacuum Configuration
Empty the dust bag before it gets too full or when the suction force weakens. Be careful not to bend the wire
frame located inside the dust bag.
Press the swivel release/lock button (6) to adjust the assembly to match the position shown. The assembly should
"click" into place.
22
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
