Led Light; Battery And Charger; E) Use And Care; Personal Safety - TOOLCRAFT LLB-100 Originalbetriebsanleitung

c) LED Light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
d) Battery and Charger
• Refer to the battery and battery charger operating instructions for further information.

e) Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep handles dry, clean and free from oil and grease.
f) Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention when operating the power tool may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Use of other safety equipment such as a dust mask,
non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of
personal injury.
• Avoid accidental starts. Do not carry the vacuum/blower with your finger over the power on button.
• Do not reach out too far when working. Keep your feet firmly on the ground at all times. This will enable
you to retain control over the power tool in unexpected situations.
• Dress safely. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the
power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.
• If there are devices for connecting dust extraction and collection facilities, please ensure that they are
attached and used correctly. Using such devices can reduce dust-related hazards.
• Do not insert body parts (fingers) and objects into the openings when the tool is operating
20