a) Attach the Dust Bag
• Remove the battery to prevent an accidental start.
• Align the dust bag attachment point (11) to the outlet port (1).
• Gently press together and rotate clockwise until the parts lock
together.
b) Attach the Nozzle
• Remove the battery to prevent an accidental start.
• Align the large opening of the nozzle (5) with the intake port (10).
• Gently press together and rotate clockwise until the parts lock
together.
c) Empty the Dust Bag
• Remove the battery to prevent an accidental start.
• Pull the zipper (12) to open the dust bag and empty the contents into a dust bin.
• Make sure the zipper is fully closed before using the vacuum.
11. Blower Configuration
Press the swivel release/lock button (6) to adjust the assembly to match the position shown. The assembly should
"click" into place.
23