Usb Mode - Silvercrest SMS 5.0 A1 Bedienungsanleitung

SilverCrest SMS 5.0 A1

USB mode

You can transfer your images to a computer via USB. To do so, first connect the device to your
computer as follows:
 Connect the small connector of the supplied USB cable to the USB 2.0 port [12] of the multi
scanner.
 Connect the large connector of the supplied USB cable to a USB port on your computer.
WARNING! When laying the cable, make sure that nobody can trip over it.
Then press the Mode button [4] to access the main menu.
Select the option "USB mode" [23] using the buttons Right/Colour [14] or Left/EV [16] and confirm
your selection with the OK/Capture button [3]. The USB icon is then displayed in the centre of the
screen [8]. The computer sets up a removable storage medium via which you have access to the
images. After you have transferred the images to your computer, press the Power button [1]. The
USB mode is now terminated and the device switches itself off.
Alternatively, you can remove the memory card from the deactivated multi
scanner and transfer it via a memory card reader (if available). To remove the
memory card, press it lightly. The memory card is ejected slightly and can be
pulled out.
22 - English
20 Select recording source
21 Format memory card
22 TV
23 USB mode
24 Energy-saving mode (automatic switch-off
after approx. 3 minutes)