Inserting Business Cards - Silvercrest SMS 5.0 A1 Bedienungsanleitung

SilverCrest SMS 5.0 A1
If you want to scan smaller photos, e.g. 7 x10cm or 9 x 13cm, use the business
card fixing to ensure that the photo is lying flat in the photo/business card
holder.

Inserting business cards

 Remove the protective foil from the business card fixing.
 Then place a business card in the device and place the business card fixing on the business card
as shown in the following image.
 Remove the backlight rail, if it is still inserted, by pressing it down lightly on the protruding point
and pulling it out.
 Insert the photo/business card holder, with the business card upwards, in the photo/business
card slot [9]. Insert the photo/business card holder as far as possible.
 To scan the business cards, please read the section "Recording" from page 17.
 Remove the photo/business card holder after you have scanned your business cards.
16 - English