Safety Precautions; General Safety Guidelines - HP DesignJet T940 Einführende Informationen

construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For some countries/regions a printed HP Limited Warranty is provided in the box.
In countries/regions where the warranty is not provided in printed format, you
may request a printed copy from http://www.hp.com/go/orderdocuments.
You can find the Declaration of Conformity by searching for BCLAA-1907 at
http://www.hp.eu/certificates.

Safety precautions

Before using your printer, read, understand, and follow these safety precautions,
and your local Environmental, Health, and Safety regulations.
This equipment is not suitable for use in locations where children are likely to be
present.
For any maintenance or part replacement, follow the instructions provided in
HP documentation to minimize safety risks and to avoid damaging the printer.

General safety guidelines

There are no operator-serviceable parts inside the printer except those covered
by HP's Customer Self Repair program (see http://www.hp.com/go/selfrepair).
Refer servicing of other parts to qualified service personnel.
Turn off the printer and call your service representative in any of the following
cases:
The power cord or plug is damaged.
●
The printer has been damaged by an impact.
●
There is any mechanical or enclosure damage.
●
Liquid has entered the printer.
●
There is smoke or an unusual smell coming from the printer.
●
The printer has been dropped.
●
The printer is not operating normally.
●
Turn off the printer in either of the following cases:
During a thunderstorm
●
During a power failure
●
Take special care with zones marked with warning labels.
2 HP DesignJet T940 Printer Series ENWW