Introductory Information; Legal Notices; Safety Precautions - HP DESIGNJET Z6200 Einführende Informationen

Introductory Information

Other sources of information
A complete guide to your printer, Using your printer, is available on the CD or DVD that comes with your printer,
and on the Web (http://www.hp.com/go/knowledge_center/djz6200/). That guide provides information on the
following topics:
• Introduction to the printer and its software
• Installing the software
• Setting up the printer
• Paper handling
• Handling ink cartridges and printheads
Printing
•
• Color management
• Practical printing examples
• Maintaining the printer
• Accessories
• Troubleshooting print-quality issues
• Troubleshooting paper issues
• Troubleshooting ink cartridge and printhead issues
• Troubleshooting general printer issues
• Front-panel error messages
• Getting help
• Printer specifications
• Job-handling scenarios
• Migrating from an HP Designjet 5000 series printer
You can also find legal and warranty information on the CD/DVD. Further information is available at HP's support
Web site (http://www.hp.com/go/knowledge_center/djz6200/).

Legal notices

The information contained herein is subject to change without notice. The only warranties for HP Products and
services are set forth in the express warranty statement accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.

Safety precautions

The following precautions ensure the proper use of the printer and prevent the printer from being damaged. Follow
these precautions at all times.
• Use the power supply voltage specified on the nameplate. Avoid overloading the printer's electrical outlet with
multiple devices.
• Ensure that the printer is well-grounded. Failure to ground the printer can result in electrical shock, fire and
susceptibility to electromagnetic interference.
Do not disassemble or repair the printer yourself. Contact your local HP Service Representative for service, see
•
Using your printer.
• Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power cord. A
damaged power cord can cause fire or electric shock. Replace a damaged power cord with an HP-approved
power cord.
• Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the printer.
Doing so can cause fire, electric shock or other serious hazards.
• Turn off the printer and unplug the power cable from the power outlet in any of the following cases:
• When you place your hands inside the printer
• If there is smoke or an unusual smell coming from the printer
• If the printer is making an unusual noise not heard during normal operation
If a piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts of the
•
printer
• During a thunderstorm
• During a power failure
1 Introductory Information
EN