Compaq Smart Array 5300-Serie Handbuch Seite 9

SCO OpenServer 5.0.x Driver Installation Procedure
A. After OS Installation
1. Insert the provided Smart Array 5300 Controller Support Software Diskette #3,
into the diskette drive.
2. Login as root and run the following commands at the prompt:
mkdir /5300btld
mount -oro /dev/fd0 /5300btld
btldinstall /5300btld
3. You will be prompted to enter the package that has to be installed. Enter ciss and
follow the instructions on the screen.
4. Run the following commands at the prompt:
umount /5300btld
rmdir /5300btld
5. Run "mkdev cpqciss" and follow the instructions on the screen.