Shutdown; Returning To Operation - Henkel LOCTITE 97006 Bedienungsanleitung

5 Dispensing
5.4

Shutdown

● Switch the power switch 10 to the position O (OFF).
Shutdown for longer Machine Downtime
Caution!
For pauses in the work of longer than 14 days, place the system out of operation to
prevent curing of the product
● Switch the power switch 10 to the position O (OFF).
● Disconnect the pneumatic supply.
● Remove the syringe 15.
Caution!
Store filled syringes only with Luer-Lock tip caps 17 and end caps 13. Dispose of the
used syringes 15 and dispensing needles 16 in an environmentally correct manner!
5.5

Returning to Operation

● Switch the power switch 10 to the
position I (ON).
The previously stored values are visible in
the digital display.
● Press button 4 START (or the
Footswitch 20) until the dispensed
quantity is roughly achieved.
● Continue dispensing with the stored values or readjust the dispensed quantity
according to Section 5.2.2.
Returning to Operation after Longer Machine Downtime
● Check the installation according to Chapter 4.
● Return to operation according to Section 5.2.
38
bar
START CONT
psi