5
Dispensing
5.1
Filling the Syringe
Warning!
If LOCTITE products are not properly handled, damage to health can result!
Observe general safety regulations for the handling of chemicals!
Observe manufacturer's instructions! Request a safety data sheet for the product used!
● Close the tip of the syringe 15 with the
Luer-Lock tip cap 17.
● Hold the syringe 15 at an angle to
prevent air bubbles during filling.
● Fill the product into the syringe 15.
● Insert the plug 14 into the syringe 15.
Depending on the dispensing task, fill
several syringes 15 at the same time.
Store filled syringes 15 only with Luer-
Lock Tipp caps 17 and end caps 13.
33