Klarstein METROBREEZE ROM SMART Handbuch Seite 33

• After selecting COOL mode, press SLEEP on remote control (or press UP and TIMER
on operating panel simultaneously) to enter SLEEP mode, both upper and lower
fans are forcibly set at LOW speed. In approximate 7h the air conditioner turns off
automatically. If SLEEP is to be cancelled, press SLEEP again or conversion mode to
cancel the sleep function.
• Press SWING to turn off or turn on the swing function.
DEHUMIDIFY mode
• In on or timer on state press MODE to select DEHUMIDIFY mode. At the moment
the corresponding indi- cator lamp is on.
• Temperature and speed are not adjustable.
• Press SWING to turn off or turn on the up/down swing function.
FAN mode
• In on or timer on state press MODE to select FAN mode. At the moment the
corresponding indicator lamp is on.
• Press SPEED to select appropriate speed, and LOW, MID and HIGH speeds can
be circularly selected. In this mode press SPEED for "5s" to run the internal dry
function, i.e. both upper and lower fans work simultane- ously. Press SPEED for
another " s" to cancel the internal dry function.
• Temperature is not adjustable.
• Press SWING to turn off or turn on the up/down swing function.
Important Hints on Use
• When full water indication is displayed, the air conditioner will stop work, you
should drain water in time. After drainage the air conditioner will start automatically.
• In DEHUMIDIFY and FAN (including the internal dry function) modes, you need not
use exhaust pipe.
• If your room faces the sun directly, please draw the curtains.
EN
33