Functions - auna Kara Liquida Handbuch

EN
26
Listening to sound output
Check that:
• The device BT functionality mode is turned on.
• Pairing of this device and the source device is completed.
• The device is in connected mode (pairing indicator (BT Link) of LED).
1. Press the stand-by/on button to turn on the device.
2. Press the mode button to select the bt function.
3. Start the bt connection from the bt stereo audio source device.
4. Press the play button (on the main unit, remote control or source
device).
Note: If the source device has an additional bass function or equalizer
function, set it Off. When these functions are on, the sound may be
distorted.

FUNCTIONS

• Switch on the device with POWER (20). Press and hold POWER to turn
off.
• Slide the CD/USB selector switch (13) to the function you want to use
and insert a CD or plug in a USB data carrier. If you plug in an AUX
cable, the unit automatically switches to the AU/Function. Therefore,
remove the AUX/cable if you want to play music via USB/CD.
• Press to play or pause. Navigate with
with .
/ and stop playback