urmet Mikra Plus Konfigurationsanleitung Seite 19

3. Press button 3 repeatedly until the third digit of the password appears on the display in the box
associated with the button.
Ref. 1784/3
4. Press button 4 repeatedly until the fourth digit of the password appears on the display in the box
associated with the button.
Ref. 1784/3
After entering the fourth digit, the button panel will check the entered password.
The password can be modified by the user by accessing the configuration web pages via the
terminal.
If the entered password is incorrect, the screen will be reset and the password you entered will be deleted.
The password can be configured at this point.
Hold button 4 pressed for at least 3 seconds to go back to the homepage. After 60 seconds of
inactivity, the device will go back to the homepage.
B.3. Once the password has been confirmed, the device is unlocked and ready to operate as a WiFi access
point.
B.4. When the device is set up as a WiFi access point, the following screen appears on the display:
Ref. 1784/3
Waiting for connection
Caution: Controls
• Exit the configuration of the button panel and restart the device.
Delete the user directory and return the device to the default factory settings (see the RESETTING
•
THE BUTTON PANEL chapter).
The device automatically switches off the WiFi access point during this step (waiting for
connection) after 10 minutes of inactivity.
DS1784-003
Button 3
Button 4
and can be used to:
Ref. 1784/4
Ref. 1784/4
Ref. 1784/4
Waiting for connection
Button 3
Button 4
19