Kenwood DPX306BT Bedienungsanleitung Seite 30

Wiring connection
(for )
Front/ Rear/ subwoofer output
Antenna terminal
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left)
B8 Green/black [
26 26
Yellow (Battery wire)
Ignition wire
(Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
ISO connectors
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Fuse (10 A)
Microphone input jack ( 12)
If no connections are made, do not let the wire come out
from the tab.
STEERING WHEEL
Light blue/yellow
REMOTE INPUT To the steering wheel
(Steering remote
remote control adapter
REMOTE CONT
control wire)
To the power control
terminal when using the
ANT CONT
Blue/White
optional power amplifier
(Power control wire/
P. CONT
or to the antenna control
Antenna control wire)
terminal in the vehicle
To connect the Kenwood
Brown
navigation system, refer
(Mute control wire)
MUTE
your navigations manual
Part list for
installation
(A) Mounting sleeve
(B) Trim plate
(C) Wiring harness
(D) Extraction key